Which type of batteries does a AM107AT sensor use?

• Related Articles

• Is a gateway necessary to use LoRaWAN devices?

  A LoRaWAN gateway (similar to a router) connected to the Internet is required to use LoRaWAN devices and to connect them to our platform Assek-IoT. This gateway can be plugged into the Internet with an ethernet cable (recommanded), a WiFi connection ...

• How to set up a EM500 sensor?

  Watch our installation video for more details. Here are the 4 steps to set up a EM500 sensor : 1) Remove the 4 screws under the device and remove the part with the metallic cylinder; 2) Take out the module inside. Be careful to not unplug the cable ...

• At what frequency does the AM107AT sensor read and send data?

  To optimize the energy consumption of the device, the AM107AT sensor can read and send data at different intervals according to the time of day. Warning : The configuration presented below is specific to the MEQ project which can be modified ...

• A sensor is transmitting partial data (missing temperature, humidity or CO2) ?

  When an AM107AT reader appears to transmit partial data, where a part of the reading (temperature, humidity, or CO2) is missing, it is generally not defective. Most of the time, this is caused by inadequate coverage of the LoRaWAN network. To address ...